Precautions for packaging, transportation and storage of stainless steel sanitary valves
Dec 19, 2022| Packaging of stainless steel sanitary valves
1. Covers should be used at both ends of the sanitary valve to protect the flange sealing surface, welded end or threaded end and the inside of the sanitary valve. The cover material should be made of wood, wood fiber board, plastic, metal, etc., and it should be fixed with bolts, steel clips or locking devices, and it should be easy to assemble and disassemble.
2. After the sanitary valve passes the test, the dirt on the surface should be removed, and the residual test medium should be removed from the valve body.
3. If sanitary ball valve accessories are provided, they should be packaged independently for long-term storage. At the same time, there should be necessary corresponding marks on the package to facilitate future identification and replacement.
4. Sanitary valves should have fillers containing corrosion inhibitors or other high-quality fillers that meet the design drawings and use requirements, and exposed threads (such as valve stems, connecting pipes), etc., should be protected.
5. When the sanitary valve is delivered, it should be properly packaged to avoid damage to the sanitary valve during transportation. It should be fixed at the bottom of the packing box to avoid shaking and collision in the box during transportation.
6. Each cargo container, crate, and packing box must be painted with clear and readable transportation protection signs on the top or side in other ways, such as waterproof, sunscreen, and no inversion, etc., and the hoisting center of gravity must be marked. Strictly observe when loading and unloading.
7. If necessary, additional protection should be provided for equipment and components that are easily damaged by water or moisture, and components with non-drainable gaps or gaps should be covered to prevent water or miscellaneous objects from entering during the entire transportation process.
8. Vulnerable parts should be packed with foam and then packed in a wooden box, and a vulnerable label should be affixed on the wooden box to prevent damage during transportation.
Shipping standards for stainless steel sanitary valves:
1. When transporting to distant areas, the outer packaging needs to be packed in wooden boxes
2. Only when it is not feasible to apply the required marking on the valve body, the marking can be applied on the nameplate. However, the marking indicating the flow direction of the sanitary valve must be marked on the valve body, no matter what standard sanitary valves are the same.
3. Regarding the marks engraved on the nameplate, generally the model, material, pressure, standard, applicable temperature, medium used, and production date are all unique, so as to facilitate procurement during maintenance and replacement.
Precautions for storage of sanitary valves:
1. Sanitary valves should be kept clean and stored in a dry room.
2. Sanitary valves stored for a long time should be inspected regularly to prevent moisture, rust and aging of rubber parts.
3. For the user-side flange connected to the valve, there should be no protruding welding scars in the connecting hole, the orifice must be chamfered, and it must be concentric with the flanges on both sides during installation.
4. When the stainless steel sanitary valve is not used for a long time and stored, it should be in a slightly open state.


