304Fine-tuning Sanitary Safety Breathing Valve Series Stainless

The 304 Fine-tuning Sanitary Safety Breathing Valve Series Stainless is a high-quality valve designed for safe and efficient ventilation of sanitary systems. Made from durable 304 stainless steel, this valve features fine-tuning capabilities allowing for precise control of air flow. Its top-quality construction ensures long-lasting performance and resistance to corrosion and wear. The valve also features a safety function that automatically closes if pressure reaches a dangerous level, providing an extra level of protection for your system.

WH-5102 Breathing Valve

Introduction to Functions and Characteristics

The valve is applied to pressure vessel pipeline system.

Breathing valve has two functions. When the pressure is higher than the set pressure (standard 1BAR), it can exhaust and turn off. When the vacuum (standard-0.2BAR) occurs in the pipeline system, the valve opens automatically to ensure the safety and protection of equipment and related instruments. At the same time, it can also meet the needs of various production processes. The valve is stainless steel. Material, sanitary design, satisfied with a variety of food processing, beer, beverage and pharmaceutical industries.

 The valve is easy to take apart and clean. 15 lb. and 25 lb. pressure springs are available. Relief pressure can be adjusted down 5 lb. The valve will open at 0.089 lb. of vacumm. Full stainless steel body construction.

Stainlless steel sanitary pressure/Vacuum Relief Valves is a self-acting device, designed for keeping tanks to work properly. It could release air out of tanks to maintain pressure, and also absorb air into tanks to be anti-vacuum.

Features

·  Fixed at 15 PSI

· Vacuum fixed at -1.5 PSI

· Stainless Steel SS304

· 1 1/2″ TriClamp fitting

· All Springs SS304

· 1 yr warranty on defects in material and workmanship

· 30 days on seals. All valves require periodic maintenance

For protection of tanks against over-pressure or vacuum. Requirement for most tanks to be covered by Warranty.

Standard Design

· Available in size: 1-1.5＇,2＇,2.5’

· Installation:supposed to be installed overhead tanks

· Standard:DIN,3A, SMS,ISO/IDF,BS/RJT,ASME/BPE

· Connection:butt-welded,clamp, or other’s upon request

Technical Specification

· Working Pressure:14.5psi/ 1bar(standard), could be pre-set before production

· Temperature rang:medium

    Technical data:  Connection：Clamp   Pressure：0.2mpa Temperature：-30℃+150℃  Working Media：Gas

Application Scene

Hot Tags: 304Fine-tuning Sanitary Safety Breathing Valve Series Stainless, China, manufacturers, suppliers, factory, wholesale, made in China