what tools will be used when cleaning the sanitary butterfly valve
Apr 03, 2024| The assembly and disassembly of the sanitary butterfly valve are strict requirements, in addition to the adjustable wrench screwdriver and hammer that we often use, there are these commonly used tools to see what role they play in the whole process.
(Tool 1) Fixed wrench: It can only pull a specification nut or bolt, this wrench is not easy to damage the nut and bolt compared with the adjustable wrench. It divides the mouth wrench, the whole wrench and the box wrench.
(Tool 2) Socket wrench: It is composed of different size of the box wrench. This wrench is also useful for difficult positions.
(Tool 3) Locking wrench: locking wrench, divided into fixed hook head wrench, flexible hook head wrench and U type locking wrench. It is used for metering and planting on trapping nuts.
(Tool 4) Special wrench: there are frying wheel wrench and throwing moment drummer. The Angle at which the ratchet wrench is pulled does not need to be changed. A torque wrench can also be called a force measuring hand. When the force is pulled, the elastic rod will be deformed, and the greater the force, the greater the deformation.
The deformation of the elastic sweat makes the dial move, and the amount of the pointer is the measured torque. This wrench just overcomes the problem of excessive force and damaged parts. It is commonly used to measure the pre-tightening force of the gasket on the electric ball valve.
(Tool 5) hand wheel wrench: It is welded with pipes and round steel below l ', and it is commonly used to switch the hand wheel.
Note: The protective cover on both sides of the flange end of the pneumatic sanitary butterfly valve needs to be removed before installation, and it should be rinsed and cleaned when it is fully opened. The whole ball valve must be tested according to the specified signal before installation, and can be installed on the line after passing the inspection. When preparing to connect with the pipeline, the residual impurities in the pipeline must be rinsed and removed first.