What environment is the EPDM sealing ring suitable for

Mar 06, 2024|

EPDM EPDM rubber sealing rings have good weather resistance, ozone resistance, water resistance, and chemical resistance. EPDM EPDM rubber sealing rings can be used for alcohols and ketones, as well as sealing in high-temperature water vapor environments. EPDM rubber sealing rings are suitable for bathroom equipment, car radiators, and automotive brake systems. It is not recommended to use EPDM rubber sealing rings for food use or exposure to mineral oil. The general temperature range for EPDM EPDM sealing rings is -55~150 ℃.
EPDM, abbreviated as EPDM, is a copolymer of ethylene and propylene. The ethylene propylene copolymer does not contain double bonds and requires the addition of a third monomer to introduce double bonds, which improves the vulcanization rate of ethylene propylene rubber. Due to the introduction of double bonds on the side chains, the basic properties are not different from those of ethylene propylene diene rubber.


EPDM (1) has the best aging resistance among general rubbers. A has the best ozone resistance: it will not produce cracks in environments with high ozone concentration. B has good weather resistance: it can be used in natural environments with sunlight, humidity, and cold for a long time without cracking. C Heat resistance: It can be used for a long time in an environment of 120 ℃, with a maximum operating temperature of 150 ℃. When the temperature is higher than the heat resistance performance: it can be used for a long time in an environment of 120 ℃. When the maximum usage temperature is 150 ℃, ethylene propylene rubber begins to slowly decompose. However, adding anti-aging agents can improve the high-temperature performance of ethylene propylene rubber, increase the usage temperature and service life at high temperatures.
 

(2) Electrical insulation: It has good electrical insulation and is particularly suitable for manufacturing electrical insulation products. (3) Low density and high filling characteristics have the lowest density among all rubbers, meaning that the weight of the same volume of ethylene propylene rubber is lighter than that of other rubbers. It can also be filled with a large amount of oil and fillers, reducing costs and having little impact on physical and mechanical properties. (4) Its low-temperature performance and impact elasticity are second only to NR in terms of elasticity. It can maintain good elasticity and small compression deformation at low temperatures. Disadvantage: Poor self-adhesion and mutual adhesiveness can cause delamination when manufacturing complex products with multi-layer structures. Oil resistance: Poor oil resistance.

Send Inquiry