The sampling valve is used in high-grade polishing equipment to meet the precision of the surface.

The sampling valve is used in high-grade polishing equipment to meet the precision of the surface. The product is suitable for stainless steel piping systems in the dairy, food, pharmaceutical, cosmetics and other industrial fields.

Stainless steel sampling valve for -20~232°C

Applicable medium: water, oil, gas and some corrosive liquids

Features: acid and alkali resistant, anti-corrosion, strong texture, beautiful appearance, smooth surface

Material: carbon steel, low alloy steel, alloy steel, etc.

Weight: based on the theoretical weight of the product

Therefore, the stainless steel sampling valve is introduced to the above factors, I hope everyone can better understand the stainless steel sampling valve.

The tank of the sampling valve should be installed at the height of the tank material 2/3. If the pipeline is convenient to operate and maintain, and the operation is safe, the sampling valve should be installed on the pump outlet or material as much as possible. The sampling valve must comply with the installation principle:

1. Do not set the sampling nozzle on the equipment and piping with vibration, and avoid it on the pipeline connected to the vibration equipment. Difficult to avoid, take measures to reduce vibration;

2. The sampling tube should be set to meet the requirements of the process and avoid dead ends. The sampling valve should be placed in a place that is easy to operate;

3. Sampling on the horizontal pipe, the sampling pipe should be placed at the top of the pipe;

4. Sampling of toxic medium with extremely high hazard and high degree of hazard. Do not vent the sample on the spot and take a closed loop sampling;

5. Sampling on the riser, the transport medium carrier shall be opened horizontally from top to bottom.