Pneumatic quick install butterfly valve

304 stainless steel pneumatic quick install butterfly valve products with polishing equipment inside and outside processing, to meet the surface requirements

1. The material of the gasket is NBR, VMQ (silica gel) or FPM (fluorine rubber), which are in accordance with FDA 177.2600;

2, connection: welding, clamp, thread, single welding single thread, flange, DIN,SMS,RJT,ISO,IDF,3A;

3, handle: two positioning, three positioning, four positioning lever handle, mostly handle, multi-position stainless steel handle,

4, Actuator: stainless steel pneumatic actuator, horizontal pneumatic actuator, electric actuator,

5, intelligent valve positioner: current signal 4-20mA (0-20mA), voltage signal 0-5V;Bus protocol DeviceNet;

Pneumatic quick installation butterfly valve, 304 stainless steel pneumatic quick installation butterfly valve, sanitary pneumatic quick installation butterfly valve manufacturer working principle:

1, can be operated automatically through the actuator or handle operation;

2, handle control valve "open" and "close" position, of course, can also be adjusted to other positions;

3. The actuator converts the axial movement of the piston into 90-degree rotary movement, which is transmitted to the butterfly valve.

Pneumatic quick loading butterfly valve, 304 stainless steel pneumatic quick loading butterfly valve, sanitary pneumatic quick loading butterfly valve

1. Pressure: 10BAR;

2. Low pressure: 0.2bar;

3, working temperature: -10° +120°;