one-piece ball valve is a relatiely new type of ball valve
Feb 27, 2024| Ball valves are mainly used in pipelines to cut off, distribute and change the flow direction of media. Cantonese ball valve is a new type of valve that has been widely used in recent years.
A. One-piece ball valve has the following advantages:
1. The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length.
2. It has simple structure, small size and light weight.
3. Tight and reliable, plastic is widely used as the sealing surface material of ball valves at present, with good sealing performance, and has also been widely used in vacuum systems.
4. It is easy to operate and opens and closes quickly. It only needs to be rotated 90° from fully open to fully closed, which is convenient for long-distance control.
5. It is easy to maintain. The ball valve has a simple structure and the sealing ring is generally movable, making it easy to disassemble and replace.
6. When fully open or fully closed, the sealing surfaces of the ball and valve seat are isolated from the medium. When the medium passes, it will not cause erosion of the valve sealing surface.
7. It has a wide range of applications, with diameters ranging from a few millimeters to several meters, and can be applied from high vacuum to high pressure.
B. One-piece ball valve can be divided into straight-through type, three-piece ball valve and right-angle type according to its channel position. The latter two ball valves are used to distribute media and change the flow direction of media. The following matters should be paid attention to when installing and maintaining Cantonese ball valves:
1. Leave a position for the valve handle to rotate.
2. Cannot be used for throttling.
3. Ball valves with transmission mechanisms should be installed upright.
C. The working principle of the Cantonese ball valve is to rely on the rotating valve to open or block the valve. Ball valves are light on and off, small in size, can be made into large diameters, have reliable sealing, simple structure, and easy maintenance. The sealing surface and spherical surface are always in a closed state and are not easily eroded by the medium. They are widely used in various industries.
D. One-piece ball valve is mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Ball valve is a new type of valve that has been widely used in recent years. It has the following advantages:
1. The fluid resistance is small, and its resistance coefficient is equal to that of a pipe section of the same length.
2. It has simple structure, small size and light weight.
3. Tight and reliable, plastic is widely used as the sealing surface material of ball valves at present, with good sealing performance, and has also been widely used in vacuum systems.
4. It is easy to operate and opens and closes quickly. It only needs to be rotated 90° from fully open to fully closed, which is convenient for long-distance control.
5. It is easy to maintain. The ball valve has a simple structure and the sealing ring is generally movable, making it easy to disassemble and replace.
6. When fully open or fully closed, the sealing surfaces of the ball and valve seat are isolated from the medium. When the medium passes, it will not cause erosion of the valve sealing surface.
7. It has a wide range of applications, with diameters ranging from a few millimeters to several meters, and can be applied from high vacuum to high pressure. When the ball rotates 90 degrees, it should all present a spherical surface at the inlet and outlet, thus cutting off the flow.
One-piece ball valve is a relatively new type of ball valve. It has some unique advantages due to its own structure, such as no friction in the switch, the seal is not easy to wear, and the opening and closing torque is small. This allows the size of the actuator to be used reduced. Equipped with a multi-turn electric actuator, the medium can be adjusted and tightly cut off. It is widely used in petrochemical, urban water supply and drainage and other working conditions that require strict cutting.


