introduction to the use process of stainless steel ball valve clamp

The use of stainless steel clamp process introduction, stainless steel ball valve clamp in the industrial application is very wide, it is mainly used for gas, liquid and other connection tools, so what is the process in the application?

1. First use the pipe cutting machine to cut the steel pipe according to the required length, check the incision section with a level to ensure that the incision section is perpendicular to the central axis of the steel pipe, if there are burrs in the incision, we need to use a grinder to smooth.

2. The stainless steel ball valve clamp will need to process the groove of the steel pipe set up on the rolling groove machine and the rolling groove machine tail frame, with a level, so that the steel pipe is in a horizontal position, the steel pipe processing end section close to the rolling groove machine, so that the central axis of the steel pipe and the roller surface vertical.

3. When stopping, it is necessary to measure the depth and width of the groove with a caliper, confirm that it meets the standard, unload the jack and take out the steel pipe. In fact, in the process of using the stainless steel ball valve clamp, we must do a good job of the problems mentioned in the precautions, but also pay attention to the later maintenance, in order to extend its service life.