How are sanitary ball valve parts designed?
Aug 05, 2022| How are sanitary ball valve parts designed? Each part of the sanitary ball valve is precisely designed and manufactured. Today we will talk about the mapping process of the parts.
1. Analysis of sanitary ball valve parts
Before starting the surveying and mapping, the whole sanitary ball valve should be analyzed. For example, the ball valve mainly acts on the opening and closing of the fluid, and the cylindrical surface of the outer end of the bonnet has external threads, which cannot be ignored. Then there is the size of the sanitary ball valve parts. Prediction.
2. Draft a plan for sanitary ball valve parts
The determination of the three views of the sanitary ball valve parts, the mode used, the proportion of the size, and the analysis of the benchmark, etc.
3. Mark the size of sanitary ball valve parts
Calipers, micrometers and other tools are used for marking and measurement, and sanitary ball valve manufacturers cannot be careless in the measurement. Divide the size grades, and measure the important dimensions accurately first, and the unimportant ones can be deviated within the range.
4. Improve surveying and mapping
Then carry out improvement and testing to achieve foolproof.
The above is an introduction to the