Advantages of sanitary diaphragm valve

Commonly used diaphragm valves include rubber-lined diaphragm valves, fluorine-lined diaphragm valves, unlined diaphragm valves, and plastic diaphragm valves. The diaphragm valve replaces the valve core assembly with a corrosion-resistant lined valve body and a corrosion-resistant diaphragm, and uses the movement of the diaphragm for adjustment. The body material of the diaphragm valve is cast iron, cast steel, or cast stainless steel, and is lined with various corrosion-resistant or wear-resistant materials, diaphragm material rubber and PTFE.

The diaphragm of the lining has strong corrosion resistance and is suitable for the adjustment of strong corrosive media such as strong acid and strong alkali.

1. The structure of the diaphragm valve is simple, the fluid resistance is small, and the flow capacity is larger than other types of valves of the same specification;

2. It is suitable for corrosive, viscous and slurry medium.

3. The valve is easy to disassemble and repair quickly, and the replacement of the diaphragm can be done on site and in a short time.

4. No leakage, can be used for the adjustment of high viscosity and suspended particle medium. The diaphragm isolates the medium from the upper cavity of the valve stem, so there is no leakage of the medium without packing.

5. The flow characteristic of the diaphragm valve is close to the quick opening characteristic, which is approximately linear before 60% of the stroke, and the flow rate after 60% does not change much.

6. Pneumatic diaphragm valves can still be equipped with feedback signals, limiters and positioners to meet the needs of automatic control, program control or flow regulation.

7. The feedback signal of the pneumatic diaphragm valve adopts non-contact sensing technology. This product adopts a film-type propulsion cylinder instead of a piston cylinder, which eliminates the disadvantage that the piston ring is easily damaged and causes leakage, which makes it impossible to push the valve to open and close. When the air source fails, the handwheel can still be operated to open and close the valve.