Types Of Safety Valve
WH-5101A types of safety valve, also known as control valve, receives the pressure of regulating control unit and uses power operation to change the final control elements of medium flow, pressure, temperature, liquid level and other process parameters. Regulating valve is an indispensable link.
- Product Introduction
Safety valves are widely used in various industries to protect equipment and prevent accidents caused by overpressure. There are several types of safety valves available in the market, including spring-loaded safety valves, pilot-operated safety valves, and bellows safety valves.
Spring-loaded safety valves are the most common type of safety valve, which is widely used in many industries. It is designed with a spring-loaded mechanism that operates based on the pressure difference. When the system pressure exceeds the set point, the valve will open and discharge the fluid, preventing any damages to the equipment and personnel. This type of valve is relatively simple in design and easy to install.
Pilot-operated safety valves are typically used for high-pressure systems that require precise control. This type of valve utilizes a pilot valve to regulate the opening and closing of the main valve. It provides improved accuracy and reliability, making it a popular choice for critical and high-pressure processes.
Bellows safety valves are designed for low-pressure systems and are used to protect equipment that is sensitive to pressure fluctuations. It consists of a metallic bellows that expands and contracts based on the system pressure, controlling the flow rate and preventing overpressure.
Industry trends show that safety valves are increasingly being integrated with advanced monitoring and control systems, such as IoT and SCADA. This allows for real-time monitoring and accurate prediction of system performance, enabling early detection of potential safety hazards and better response time to prevent accidents. Additionally, the use of sustainable materials and technologies in safety valves is becoming more prevalent to ensure environmental and social responsibility.
| Size | D1 | D2 | D3 | D4 | H |
| 1.5" | Φ25 | Φ50.5 | Φ90 | Φ60 | 300 |
Product Description
Q: what is the use of the glass cover on the pressure valve?
Answer: glass cover adds pure water, fill on 1/2 above water.
Q;What does the glass cover and water do?
A;Blisters form when pressure is created during fermentation.Add water to the glass cover to see the effect of fermentation and reduce bacteria contamination
Q;Is the scale right?
A: correct.
Q:what about sensitivity?
A;Sensitivity plus or minus 0.05bar accuracy is good.
Q: is there a difference in mass compared to KIESELMANN?
Answer: the quality does not matter difference, compare not to come up and down, the quality can say is same.
Q: do you test each valve?
Answer: each test, we have a test standard, not to meet our requirements, will not be shipped.
Q: are your materials up to hygiene standards?
Answer: the sealing ring is made of EPDN and other materials are sus304.
Q: how many years has your factory been producing valves?
A;We are specialized in making valves on beer cans for more than 10 years.
Q: what is the problem that the water in the glass cover keeps bubbling and the pressure drops?
Answer :(1) whether the liquid is filled up, and (2) whether there are impurities in the CLP pipe. There are two problems: impurities will stick on the sealing surface of the main valve core, causing the valve to drop pressure.
Q: how to deal with stress?
A;When there is pressure in the tank, pull down the top ball and pull up hard to allow the gas to flush out the impurities. If it does not flush out, this will remove the valve and remove the spool by hand cleaning.Please have a look at our video.Note: do not remove valve when fermentation is under pressure.
Q: can non - standard customization?
Answer: it depends on which place needs non-standard customization.
Q: will the glass cover crack?
Answer: vitreous cover cannot touch alcohol or ethanol, time grew meeting ageing appears crack.Add delicate a little disinfectant can, had better not add any alcohol and so on thing.When the fermentation exhaust gas CO2 gas has the sterilization effect.
Application scene
FAQ:
to place your order:
1. Send us your order list (models/quantities/colors)
2. we will send you PROFORMA INVOICE (PI) with shipping cost and Payment information for your confirmation.
3. You arrange payment after you confirmed proforma invoice, we will arrange production after received your payment notice.
Specific delivery date depends on your specific needs, normally delivery in 1-3 days.
4.We will arrange delivery after your payment arrived and goods ready,and at the same time we will tell you goods tracking number so that you could know your goods condition by this number from courier site.
5.You will receive your order in about 3-5 days after goods ship out.
Hot Tags: types of safety valve, China, manufacturers, suppliers, factory, wholesale, made in China, non relieving pressure regulator, electronic back pressure regulator, gas flow regulator valve, co2 valve regulator, pilot pressure regulator, programmable pressure regulator
