Sanitary Adaptive Exhaust Beer Spunding Valve With Gauge Fermentation Bung

Sanitary Adaptive Exhaust Beer Spunding Valve with Gauge Fermentation Bung is a must-have brewing accessory for homebrewers and professional brewers alike. This high-quality valve regulates the pressure of the fermenting beer, ensuring consistent and reliable fermentation. Equipped with a gauge and a sanitary bung, it can be easily installed in the fermenter in just seconds. Its ability to adapt to different pressure ranges makes it compatible with a wide variety of brewing setups. With this valve, you can achieve precise carbonation control and eliminate the need for extra equipment. Its durable construction ensures that it will provide reliable performance for years to come. 

WENHAN Product Catalogue

Classification of Breathing Valve; Regulating Breathing Valve Pressure-Fixed Respiratory Valve

Classification of safety valves; PRV and PVRV safety valves

Classification of relief valves; caliber size three clamp link size DN flexible connection and other interface relief valves.

Classification of pressure regulating valves; Scaled pressure regulating valves, non-scale pressure regulating valves, PRV and PVRV pressure regulating valves.

WENHAN Regulating valve, also known as control valve, receives the pressure of regulating control unit and uses power operation to change the final control elements of medium flow, pressure, temperature, liquid level and other process parameters. Regulating valve is an indispensable link, so the normal operation of regulating valve is related to the guarantee of the quality and output of industrial products.

Regulating valve is used to regulate the operating pressure, so it is called regulating valve. Whether a beer is brewed well or not depends on the control valve. For the following reasons, the control valve becomes very important.

1. Regulating valve is a throttling device, which belongs to moving parts. Regulating valve needs to constantly change the flow area of throttling parts so as to change the control variables to adapt to the changes of load or operating conditions. Therefore, higher requirements are put forward for the sealing, pressure resistance and corrosion of the control valve assembly. For example, the seal will increase the friction of the control valve, increase the dead zone of the control valve, resulting in poor quality of pressure control and so on.

2. The movable parts of the control valve are the main causes of running, running, dropping and leaking. It not only wastes resources or materials, but also pollutes the environment and causes accidents.

The contact medium of the regulating valve material may be different from that of the testing element, so higher requirements are put forward for the corrosion resistance, strength and stiffness of the regulating valve.

3. The throttling of the control valve makes the energy consumed inside the valve. Therefore, the reasonable choice and consideration should be made between reducing the energy consumption, reducing the pressure loss of the control valve and ensuring the better control quality.

4. The control valve throttles the fluid and operates at the same time. For example, when the outlet pressure of the control valve is lower than the steam pressure of the liquid, it causes flash; when the downstream pressure of the control valve is higher than the steam pressure of the liquid, it causes cavitation. The noise caused by the control valve is related to the design of the flow path, the operating pressure and the characteristics of the controlled medium. Therefore, reducing noise and pressure loss put forward higher requirements for the control valve.

5. The control valve has strong adaptability. It is installed in various production processes. The operation conditions of high temperature, low temperature, high pressure, large flow rate and small flow rate in the production process require that the control valve has various functions. The control valve can meet the requirements of different applications.

WENHAN Linkage Test of Regulating Valve

The control valve must carry out linkage test before starting the device after installation.

The following points should be paid attention to in linkage test

(1) Before the adjustment linkage test, the process pipeline must be cleaned strictly and qualified. It is strictly forbidden to install the control valve for the unqualified pipeline. Because the residue in the pipeline, such as welding slag, dust and other hard impurities, can damage the piston and seat sealing surface.

(2) Regulating valve with handwheel knob mechanism, handwheel knob mechanism should be in the "release" position.

Check whether the supply pressure of the pressure relief valve meets the requirements of each control valve.

FAQ:

Why choose us?

1. Manufacturer Place your order directly to the factory, no intermediate cost, more fast delivery ,better service and economical cost.

2. Strict QC inspection Good quality is top important during cooperation. We will make QC inspection strictly before ship out to make sure every piece stayed in a good condition. If any problems made by us after you received cases then we will full responsible to compensate you.

3. Stable Supply As a manufacturer with strong ability for phone cases production, we have enough stock to meet your needs.

4. Professional sale team with the best after-service professional and experienced sales team will provide you excellent service.

Hot Tags: sanitary adaptive exhaust beer spunding valve with gauge fermentation bung, China, manufacturers, suppliers, factory, wholesale, made in China, water supply pressure regulator, flow reducing valve, smc flow regulator, pressure flow regulator, pressure regulator valve with gauge, 15 psi water pressure regulator