Tri Clamp 3 Way Valve

The Tri Clamp 3 Way Valve is a versatile valve used in various industries for controlling the flow of liquids or gases. It is designed to prevent contamination and ensure smooth operations. Made of high-quality stainless steel, it has excellent resistance to corrosion and is more durable compared to other valves. It is also easy to install and maintain.

In recent years, the demand for has been on the rise, especially in the biotech, pharmaceutical, and food processing industries. This is due to its ability to prevent contamination and maintain the integrity of the product. The increasing demand for high-quality products has also contributed to the growth of this industry. As technology continues to evolve, expected to become more advanced, providing solutions for more complex industrial applications.

Product Description

Other requests for valve settings

1. For valves installed in parallel, the base lines should be aligned as much as possible. When the valves are adjacently installed, the net distance between the handwheels should not be less than 100mm; the valves can also be staggered to reduce the distance between the pipelines.
2 For valves that are technically required to be connected to the equipment nozzle, when the nominal diameter, nominal pressure, sealing surface type, etc. are the same as or match the equipment nozzle flange, they should be directly connected to the equipment nozzle. When the valve has a concave flange, it is necessary to ask the equipment professional to configure a convex flange on the corresponding nozzle.
3 Unless the technology has special requirements, the valves on the bottom pipes of towers, reactors, vertical vessels and other equipment shall not be placed in skirts.
4 When the branch pipe is led out from the main pipe, the cut-off valve should be set on the horizontal section of the branch pipe close to the root of the main pipe, so that the fluid can be drained to both sides of the valve.
5 The branch pipe cut-off valve on the pipe gallery is not frequently operated (only used during parking maintenance). If there is no permanent ladder, consideration should be given to leaving a space for the use of a temporary ladder.
6. When the high-pressure valve is opened, the engine power is large. It is necessary to set up a bracket to support the valve and reduce the engine stress. The height of the device is preferably 500-1200mm.
7 The fire water valves, fire steam valves, etc. in the equipment boundary area should be arranged in a scattered manner, and the safety zone that operators can easily approach when an accident occurs.
8 The valve group of the fire-fighting steam distribution pipe of the heating furnace should be easy to operate, and the distance between the distribution pipe and the furnace body should not be less than 7.5m.
9 When installing a threaded valve on the pipeline, a union must be installed near the valve for easy disassembly.
10 Wafer valves or butterfly valves shall not be directly connected with the flanges of other valves and pipe fittings, and a short pipe with flanges at both ends shall be added in the middle.
11 The valve should not bear the external load to avoid damage to the valve due to excessive stress

Hot Tags: tri clamp 3 way valve, China, manufacturers, suppliers, factory, wholesale, made in China