What Is The Principle Of Y Filter

Wenhan valve to explain to you: Y-type filter is Y-shaped, one end is to make water and other fluid through, one end is to precipitate waste, impurities, usually it is installed in the pressure reducing valve, pressure relief valve, fixed water level valve or other equipment at the inlet end, its role is to remove impurities in the water to protect the normal operation of valves and equipment, the filter to be treated by the water inlet into the body of the water impurities in the water are deposited in the stainless steel The impurities in the water are deposited on the stainless steel screen, which generates a pressure difference. Through the differential pressure switch to monitor the pressure difference between the inlet and outlet changes, when the differential pressure reaches the set value, the electronic controller to the hydraulic control valve, drive motor signals, triggering the following actions: motor-driven brushes rotate to clean the filter element, while the control valve opens for sewage, the entire cleaning process only lasts tens of seconds, when the cleaning is over, close the control valve, the motor stops rotating, the system to return to its initial state, and begin to enter the next filtration process. into the next filtration process. After the equipment is installed, the technicians will debug it, set the filtering time and cleaning conversion time, and the water to be treated will enter the machine body from the water inlet, and the filter will start to work normally.