The Installation Method Of Sanitary Safety Valve Is Introduced

Sanitary safety valve is designed to protect the safety of equipment, it is installed in the discharge pressure loop, the pipeline, pump, device, storage tank and so on to protect. It is widely used in food, beverage, dairy, pharmaceutical, beer and other industries. Installation method of sanitary safety valve:
1. Require to remove the protective cover on both sides of the flange end, and then clean and clean it after the valve body of the sanitary grade safety valve is opened.
2. Before installation, the whole machine should be tested according to the specified signal, and the online installation can be carried out after meeting the standard.
3. When starting the pipeline connection, be sure to clean the residual residue in the pipeline first.
4. During the installation period, do not use the actuator part of the ball valve as the lifting point to prevent damage to the actuator and accessories.
5. The sanitary safety valve should be installed in the vertical direction or parallel direction of the pipeline.
6. The pipeline near the installation point of the sanitary safety valve should not be low or bear the phenomenon of external force, and the deviation of the pipeline can generally be treated with pipe supports or supports.
7. After connecting with the pipe, the bolts can be connected at the same time with the specified torque to cross-lock the flange.
The above is the installation method of sanitary safety valve, I hope it will be helpful to you.