Beer Wall Beer Tap: Detailed Disassembly And Cleaning Steps
Apr 10, 2024| Beer taps are an excellent way to serve fresh, cold beer to your friends and family. However, they require regular maintenance to ensure that the beer you serve is hygienic and tastes great. One of the most important aspects of beer tap maintenance is disassembly and cleaning. In this blog post, we will guide you through the detailed disassembly and cleaning steps of a beer wall beer tap.
Step 1: Turn Off Tap
Before starting the disassembly process, always ensure that the beer tap is turned off. This means switching off the gas supply and unplugging the beer keg.
Step 2: Disassemble the Tap
Start disassembling the tap by removing the tap handle. Many tap handles will unscrew from the top of the tap or require a small screwdriver to loosen the screw that holds them in place.
Next, remove the cover or cap that encloses the mechanism and valves of the beer tap. Depending on the make and model of your beer tap, the cover may snap off or require the removal of screws.
Step 3: Remove The Beer Faucet
Once you have access to the beer tap mechanism, remove the beer faucet. Unscrew it from the tap by turning it counterclockwise. Set it aside for cleaning.
Step 4: Remove the Tap Rod
Loosen the screw holding the tap rod in place and remove it from the tap. Ensure you hold onto the rubber washer that surrounds the tap rod, as it is essential to prevent beer from leaking.
Step 5: Cleaning The Parts
Clean the disassembled parts using warm water and mild detergent. If there is any build-up or keg residue on any part, use a soft brush to scrub it off.
Step 6: Sanitize
Having thoroughly cleaned all parts, sanitize them with a food-grade sanitizer. This helps ensure that any residual bacteria or germs are eliminated, and the beer tap is hygienic.
Step 7: Reassemble the Tap
After thoroughly washing and sanitizing your beer wall beer tap components, start with reassembling the tap rod, faucet, and cover or cap. Ensure that you have replaced the rubber washer between the tap rod and the cover before screwing it back in place.
Step 8: Attach the Tap Handle
Attach the tap handle to the top of the tap and tighten it in place.
Step 9: Test the Tap
Reconnect the gas supply, connect a new keg of beer, and open the tap valve to test that your beer wall beer tap is dispensing correctly.
Maintaining your beer tap is critical to ensure that your beer tastes fresh and hygienic. Follow these detailed disassembly and cleaning steps for your beer wall beer tap to maintain a great taste and deliver a fantastic beer experience.


