Ball Valve Working Principle And Practical Role
Feb 01, 2024| The working principle and practical role of the ball valve: the working principle of the ball valve is to make the valve smooth or blocked by rotating the valve stem. Ball valve switch light, small size, can be made into a large caliber, reliable sealing, simple structure, easy maintenance, sealing surface and sphere are often in a closed state, not easy to be washed by the medium, in various industries have been widely used. Ball valve and plug valve are the same type of valve, the difference is that its closing part is a ball, the ball rotates around the center line of the valve body to achieve the opening and closing of a valve. Ball valves are mainly used to cut off, distribute and change the flow direction of the medium in the pipeline. Ball valve is a new type of valve widely used in recent years, it has the following advantages: 1. The fluid resistance is small, and its resistance coefficient is equal to that of the pipe segment of the same length. 2. Simple structure, small size, light weight. 3. Tight and reliable, the sealing surface material of the ball valve is widely used in plastic, good sealing, and has also been widely used in vacuum systems. 4. Easy to operate, open and close quickly, from full open to full close as long as the rotation of 90 degrees, easy to remote control. 5. Easy maintenance, ball valve structure is simple, the sealing ring is generally active, disassembly and replacement are more convenient. 6. When fully open or fully closed, the sealing surface of the ball and the seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when it passes through. 7. Wide range of application, small diameter to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied. Ball valve according to the structure of the form can be divided: first, floating ball valve: ball valve ball is floating, under the action of medium pressure, the ball can produce a certain displacement and tight pressure on the outlet sealing surface to ensure that the outlet is sealed. The structure of the floating ball valve is simple and the sealing is good, but the load of the ball bearing the working medium is all passed to the outlet sealing ring, so it is necessary to consider whether the sealing ring material can withstand the working load of the ball medium. This structure is widely used in low and medium pressure ball valves. Second, fixed ball valve: the ball of the ball valve is fixed, and does not move after pressure. Fixed ball valves are equipped with floating seat, under the pressure of the medium, the seat is moved, so that the sealing ring is firmly pressed on the ball to ensure sealing. Bearings are usually installed on the upper and lower shafts of the ball, and the operation torque is small, suitable for high pressure and large diameter valves. In order to reduce the operating torque of the ball valve and increase the reliability of the seal, in recent years, the oil seal ball valve has appeared, both in the sealing surface pressure injection of special lubricating oil to form a layer of oil film, that is, to enhance the sealing, but also reduce the operating torque, more suitable for high-pressure large-caliber ball valves. Third, elastic ball valve: the ball of the ball valve is elastic. The ball and the seat sealing ring are made of metal materials, the specific pressure of the seal is very large, and the pressure of the medium itself can not meet the requirements of the seal, and external forces must be applied. This valve is suitable for high temperature and high pressure media. An elastic sphere is an elastic groove opened at the lower end of the inner wall of the sphere to obtain elasticity. When the channel is closed, use the wedge head of the stem to expand the ball and press the seat to seal. The wedge head is loosened before the ball is turned, and the ball is then restored to its original shape, so that there is a small gap between the ball and the seat, which can reduce the friction and operating torque of the sealing surface.


